Low Volume PCB Assembly

Low volume PCB assembly is your bespoke solution for well-defined flexibility for mounting components on relatively small batch of bare boards! If you are looking at a new launch, a low cost PCB prototype is an absolute necessity. After all, you do not want a situation where you are dealing with errors after a large production run. Alternately, you could be a small batch PCB manufacturer who wants to produce small batch PCB quickly and affordably without sacrificing on quality. These are some of the reasons that you need a partner that specializes in Small batch PCB assembly (Low volume PCB Assembly), where small batch printed circuit boards can be reliably put together.

At Technotronix, we offer you the facility of low volume PCB Assembly, small batch PCB prototypes, low cost PCB fabrication and small run PCB manufacturing that meets your bespoke requirements. Our advanced PCB manufacturing facilities in California, USA; are fully equipped to provide you high quality and low cost printed circuit boards. In addition, we also offer turn-key PCB assembly services with quick turnaround times.

Capabilities of Low Volume PCB Assembly

At Technotronix, not only are we fully equipped to offer small batch Printed Circuit Boards, we also ensure that they stick to the highest quality standards. This is made possible on account of several technologies and processes that we have put in place, including but not limited to:
Capability Standard
Types of PCB assembly low volume We specialize in the following types of small batch assemblies:
  • Surface Mount Technology (SMT PCB)
  • Through-Hole Technology (TH)
  • Mixed Technology PCB Assembly
Design for Manufacturing Services (DFM) Our robust Design for Manufacturing processes involve the following:
  • Validation of Bill of Materials
  • Authentication of Circuit Diagrams, Gerber Files and Assembly Drawings
The above goes a long way in reducing any errors as also significantly improving the turnaround times.
Design for Testing Services (DFT) Our clients are encouraged to have test points in their PCB, that in turn allows them to decide on fixtures and probe types. The Design for Testing service goes a long way in identifying:
  • Functionality of testing requirements
  • Diagnostic instructions
  • Problem identification and more
Custom small batch low cost printed circuit boards We are fully equipped to customize the small batch printed circuit boards, low volume bare boards with low cost to your bespoke needs. The small batch PCB size does not come in the way of assembling high density PCBs.
Pre-production samples for small batch printed circuit boards Our capabilities include offering pre-production samples for review before the final production. In turn, this avoids any risks and errors not to mention costs. In addition, our robust testing protocols from electrical testing to X-ray inspection ensure that any PCB assembly low volume issues are resolved before the order is shipped out.

Benefits of Low Volume printed circuit board Assembly

Perfect for new Products

Low Volume PCB Assembly works well for OEMs who are building new products or for startups who are undertaking a new launch. The small batch printed circuit board ensures there is enough scope to test the product efficacy before you undertake production of large batches.

Low Cost PCB

With a partner that specializes in Low Volume PCB Assembly, you also tend to enjoy a significant cost advantage. The PCB Assembly service would already have existing relationships with vendors and thereby part procurement will be possible at optimal rates despite the fact that your requirement is small.

PCB Testing

The advantage with low volume PCBs is also that you can undertake robust testing mechanisms. This in turn, ensures easy understanding of whether any repairs or replacements are needed.

Bare board design changes

Small production runs also ensure that it is easy to make any design changes that may be deemed necessary, before any large production runs are undertaken.

Application of Low Volume PCB Assembly Services

Low Volume PCB Assembly is a requirement in a wide variety of applications, including but not limited to:

PCB Assembly Low Volume

Low volume PCB Prototypes, where you want to be sure of the viability of the product before getting into large scale production.

Low Volume PCB Assembly

Low Volume PCB Assembly is also perfect for products where lot sizes may vary or where production processes are varied and therefore require assembly lines to change over product requirements.

Technotronix Advantage for small batch, low volume, low cost printed circuit boards

The benefit that Technotronix brings to the table in making low volume PCB Assembly includes the fact that we have multiple assembly lines that can shift between product requirements. The fact that we are fully equipped to offer you prototypes even for boards that are high density ensure that we have you fully covered. Even the smallest of batches go through rigorous quality checks before they are dispatched. With over four decades of experience in PCB Assembly, what you get from us aren’t just high-quality boards but also a whole body of industry knowledge that ensures that you do not have to reinvent the wheel. Our qualified and experienced staff ensure that you get nothing but the best. The fact that we offer extremely competitive prices and a quick turnaround time explains the trust reposed on us by a large number of clients across industry verticals.

When you have a small order, odds are that you want it handled by a single point of contact. You can, therefore, rely on our turnkey services that take away the hassle and allow you the time and energy to focus on your core area of business.

Get in touch with our team of PCB expert engineers with your bespoke requirements and let them take care of the rest.

Low Volume PCB Assembly FAQs

Low volume PCB Assembly refers to assembling a small quantity of circuit board including DFM checking as well as DFT checking.

Absolutely. We cater to small batches without compromising on quality.

It is perfect for prototypes, testing a new product as well as making any design changes.

Low volume low cost printed circuit boards require for the situation where you are dealing with errors after a large production run. Alternately, you could choose e a small run PCB manufacturer who wants to produce low volume PCBs quickly and affordably without sacrificing on quality.

Yes, we are fully equipped to provide it.

Our standard lead times for low volume PCB assembly is 2-4 days. Although it is depending on the complexity of your printed circuit board project.

Yes, we offer low volume PCBs at extremely optimal costs that work for your project.

Yes, you can count on us to offer you lead-free PCB assemblies in low volumes.

Yes, we can provide low volume PCB assembly in 24 hours.

Our complete low volume high mix printed circuit board assembly solution includes low volume bare boards, low cost printed circuit board assembly, low volume PCB prototypes, fabrication and full production run. Get a quick quote for any type of requirement.

Yes. We have stringent testing protocols. Irrespective of the batch size, we ensure each batch is fully tested before dispatch.

Absolutely. We offer bespoke custom-made printed circuit board solutions suited to your requirements.

We have over 40 years of experience in various PCB Fabrication and Assembly techniques.

Yes absolutely! You can count on us for PCB assembly rework services that ensure optimal performance.
contact icon

Are you Looking for low volume PCB assembly, small batch bare boards, low cost PCB prototypes, low volume printed circuit boards, low cost circuit board faqs for your project? You can use low volume PCB Assembly quote request form or low volume PCB Fabrication quote request form and submit information. In case you need low volume PCB fabrication and low volume PCB assembly both, please submit both forms separately. Alternatively, you can email us BOM and Gerber files on sales@technotronix.us or call us on 714/630-9200 in case any other clarification is required in respect to our low volume PCB Assembly services.

Timer

PCB Assembled in 24 hours

Best Turn around time for Prototype PCB assembly.
Kitted and Turn-Key option as per customers requirement.
Timer

REQUEST OUR BROCHURE

To know more about Technotronix
Download Brochure Request Brochure
Request Brochure

Please provide your email address. We’ll send you copy of our brochure in a PDF format.

You have reached the end of a page.
Back to top